NAME	Green Zeolite
ACTIVE INGREDIENT	Hydrated Aluminosilicate
USED FOR	Removal of Ammonia (NH₃) from Tank or Pond water

Green Zeolite (5~30mm) is a natural mineral that has an unique property of having 'micro pores'. Correctly known as a “molecular sieve”. In simple terms, it can be thought of millions of tiny holes.These micro pores have the ability to absorb different molecules. More specifically, in the case of Tank or Pond water, removal of Ammonia (NH3) molecules.

When Zeolite is placed in a Tank or Pond, it will immediately start to adsorb the ammonia ions in the water. Millions of Amoina Ions get stored within the Micro Pores, correctly Molecular Sieve within Zeolite. Once the Molecular Sieve is full of Ammonia Ions, the Zeolite is 'saturated' and seizes to absorb anymore Ammonia Ions and should be removed.

Saturate Zeolite can be 'recharged' by placing it in water with Pond Salt which is Sodium Chloride (NaCl). Here what happens is that the Sodium Ions in the Pond Salt, force the Ammonia Ion out of the Molecular Sieve in Zeilite, 'recharging' it.

Zeolite can be used this way upto 4-5 years with no drop in performance

WHEN TO USE ZEOLITE	Controlling and removing unexpected Ammonia spikes
	When a new biological filter is maturing, and Ammonia is not being removed
	For Hospital Tanks or Ponds, that have no Biological Filter

HOW TO USE ZEOLITE	Rinse clean the powder on new Zeolite
	Divide the Zeolite equally and place in Filter Bags
	Test Ammonia, prior to placing the Zeolite in the Tank or Pond
	Place half the quantity of Zeolite in the last chamber of the filter, or anywhere in the tank or pond that has a strong flow of water
	The Zeolite will immediately start absorbing the Ammonia into its pores
	Test water for Ammonia (NH3) at fixed time intervals, when Ammonia removal slows down, the Zeilite is getting saturated and needs to be 'recharged'
	Remove and recharge saturated Zeolite, put the other half part, into the same area of the Tank or Pond

RECHARGING ZEOLITE	Prepare a bucket of water with a Pond Salt (Sodium Chloride) at 100g per Litre of water
	Place the saturated Zeolite in it, for a few hours.
	Once the Zeolite is recharged, rinse the salt water off and re-use.

WARNING

Zeolite is only a method for removing ammonia unexpected ammonia, it is not a substitute for a functioning biological filter.

If it is intended to use Pond Salt, or if Pond Salt has been used in the Tank or Pond, do not use Zeolite

It is recommended to not use Zeolite as a filter medium

Zeolite should not be used in Salt / Marine Water tanks